§Additional configuration
There are a number of different types of configuration that you can configure in production. The three mains types are:
Each of these types have different methods to configure them.
§General configuration
Play has a number of configurable settings. You can configure database connection URLs, the application secret, the HTTP port, SSL configuration, and so on.
Most of Play’s configuration is defined in various .conf files, which use the HOCON format. The main configuration file that you’ll use is the application.conf file. You can find this file at conf/application.conf within your project. The application.conf file is loaded from the classpath at runtime (or you can override where it is loaded from). There can only be one application.conf per project.
Other .conf files are loaded too. Libraries define default settings in reference.conf files. These files are stored in the libraries’ JARs—one reference.conf per JAR—and aggregated together at runtime. The reference.conf files provide defaults; they are overridden by any settings defined in the application.conf file.
Play’s configuration can also be defined using system properties and environment variables. This can be handy when settings change between environments; you can use the application.conf for common settings, but use system properties and environment variables to change settings when you run the application in different environments.
System properties override settings in application.conf, and application.conf overrides the default settings in the various reference.conf files.
You can override runtime configuration in several ways. This can be handy when settings vary between environments; you can changing the configuration dynamically for each environment. Here are your choices for runtime configuration:
- Using an alternate
application.conffile. - Overriding individual settings using system properties.
- Injecting configuration values using environment variables.
§Specifying an alternate configuration file
The default is to load the application.conf file from the classpath. You can specify an alternative configuration file if needed:
§Using -Dconfig.resource
This will search for an alternative configuration file in the application classpath (you usually provide these alternative configuration files into your application conf/ directory before packaging). Play will look into conf/ so you don’t have to add conf/.
$ /path/to/bin/<project-name> -Dconfig.resource=prod.conf
§Using -Dconfig.file
You can also specify another local configuration file not packaged into the application artifacts:
$ /path/to/bin/<project-name> -Dconfig.file=/opt/conf/prod.conf
Note that you can always reference the original configuration file in a new
prod.conffile using theincludedirective, such as:include "application.conf" key.to.override=blah
§Overriding configuration with system properties
Sometimes you don’t want to specify another complete configuration file, but just override a bunch of specific keys. You can do that by specifying then as Java System properties:
$ /path/to/bin/<project-name> -Dplay.crypto.secret=abcdefghijk -Ddb.default.password=toto
§Specifying the HTTP server address and port using system properties
You can provide both HTTP port and address easily using system properties. The default is to listen on port 9000 at the 0.0.0.0 address (all addresses).
$ /path/to/bin/<project-name> -Dhttp.port=1234 -Dhttp.address=127.0.0.1
§Changing the path of RUNNING_PID
It is possible to change the path to the file that contains the process id of the started application. Normally this file is placed in the root directory of your play project, however it is advised that you put it somewhere where it will be automatically cleared on restart, such as /var/run:
$ /path/to/bin/<project-name> -Dpidfile.path=/var/run/play.pid
Make sure that the directory exists and that the user that runs the Play application has write permission for it.
Using this file, you can stop your application using the kill command, for example:
$ kill $(cat /var/run/play.pid)
§Using environment variables
You can also reference environment variables from your application.conf file:
my.key = defaultvalue
my.key = ${?MY_KEY_ENV}
Here, the override field my.key = ${?MY_KEY_ENV} simply vanishes if there’s no value for MY_KEY_ENV, but if you set an environment variable MY_KEY_ENV for example, it would be used.
§Server configuration options
A full list of server configuration options, including defaults, can be seen here:
play {
server {
# The root directory for the Play server instance. This value can
# be set by providing a path as the first argument to the Play server
# launcher script. See `ServerConfig.loadConfiguration`.
dir = ${?user.dir}
# HTTP configuration
http {
# The HTTP port of the server. Use a value of "disabled" if the server
# shouldn't bind an HTTP port.
port = 9000
port = ${?http.port}
# The interface address to bind to.
address = "0.0.0.0"
address = ${?http.address}
}
# HTTPS configuration
https {
# The HTTPS port of the server.
port = ${?https.port}
# The interface address to bind to
address = "0.0.0.0"
address = ${?https.address}
# The SSL engine provider
engineProvider = "play.core.server.ssl.DefaultSSLEngineProvider"
engineProvider = ${?play.http.sslengineprovider}
# HTTPS keystore configuration, used by the default SSL engine provider
keyStore {
# The path to the keystore
path = ${?https.keyStore}
# The type of the keystore
type = "JKS"
type = ${?https.keyStoreType}
# The password for the keystore
password = ""
password = ${?https.keyStorePassword}
# The algorithm to use. If not set, uses the platform default algorithm.
algorithm = ${?https.keyStoreAlgorithm}
}
# HTTPS truststore configuration
trustStore {
# If true, does not do CA verification on client side certificates
noCaVerification = false
}
}
# The type of ServerProvider that should be used to create the server.
# If not provided, the ServerStart class that instantiates the server
# will provide a default value.
provider = ${?server.provider}
# The path to the process id file created by the server when it runs.
# If set to "/dev/null" then no pid file will be created.
pidfile.path = ${play.server.dir}/RUNNING_PID
pidfile.path = ${?pidfile.path}
# Configuration options specific to Netty
netty {
# The maximum length of the initial line. This effectively restricts the maximum length of a URL that the server will
# accept, the initial line consists of the method (3-7 characters), the URL, and the HTTP version (8 characters),
# including typical whitespace, the maximum URL length will be this number - 18.
maxInitialLineLength = 4096
maxInitialLineLength = ${?http.netty.maxInitialLineLength}
# The maximum length of the HTTP headers. The most common effect of this is a restriction in cookie length, including
# number of cookies and size of cookie values.
maxHeaderSize = 8192
maxHeaderSize = ${?http.netty.maxHeaderSize}
# The maximum length of body bytes that Netty will read into memory at a time.
# This is used in many ways. Note that this setting has no relation to HTTP chunked transfer encoding - Netty will
# read "chunks", that is, byte buffers worth of content at a time and pass it to Play, regardless of whether the body
# is using HTTP chunked transfer encoding. A single HTTP chunk could span multiple Netty chunks if it exceeds this.
# A body that is not HTTP chunked will span multiple Netty chunks if it exceeds this or if no content length is
# specified. This only controls the maximum length of the Netty chunk byte buffers.
maxChunkSize = 8192
maxChunkSize = ${?http.netty.maxChunkSize}
# Whether the Netty wire should be logged
log.wire = false
log.wire = ${?http.netty.log.wire}
# Netty options. Possible keys here are defined by:
#
# http://netty.io/3.9/api/org/jboss/netty/channel/socket/SocketChannelConfig.html
# http://netty.io/3.9/api/org/jboss/netty/channel/socket/ServerSocketChannelConfig.html
# http://netty.io/3.9/api/org/jboss/netty/channel/socket/nio/NioSocketChannelConfig.html
#
# Options that pertain to the listening server socket are defined at the top level, options for the sockets associated
# with received client connections are prefixed with child.*
option {
# Set whether connections should use TCP keep alive
# child.keepAlive = false
# Set whether the TCP no delay flag is set
# child.tcpNoDelay = false
# Set the size of the backlog of TCP connections. The default and exact meaning of this parameter is JDK specific.
# backlog = 100
}
}
}
# Configuration specific to Play's experimental Akka HTTP backend
akka {
# How long to wait when binding to the listening socket
http-bind-timeout = 5 seconds
}
}
§Logging configuration
Logging can be configured by creating a logback configuration file. This can be used by your application through the following means:
§Bundling a custom logback configuration file with your application
Create an alternative logback config file called logback.xml and copy that to <app>/conf
You can also specify another logback configuration file via a System property. Please note that if the configuration file is not specified then play will use the default logback.xml that comes with play in the production mode. This means that any log level settings in application.conf file will be overridden. As a good practice always specify your logback.xml.
§Using -Dlogger.resource
Specify another logback configuration file to be loaded from the classpath:
$ /path/to/bin/<project-name> -Dlogger.resource=conf/prod-logger.xml
§Using -Dlogger.file
Specify another logback configuration file to be loaded from the file system:
$ /path/to/bin/<project-name> -Dlogger.file=/opt/prod/prod-logger.xml
§Using -Dlogger.url
Specify another logback configuration file to be loaded from an URL:
$ /path/to/bin/<project-name> -Dlogger.url=http://conf.mycompany.com/logger.xml
§JVM configuration
You can specify any JVM arguments to the application startup script. Otherwise the default JVM settings will be used:
$ /path/to/bin/<project-name> -J-Xms128M -J-Xmx512m -J-server