Documentation

You are viewing the documentation for the 2.0.6 release in the 2.0.x series of releases. The latest stable release series is 3.0.x.

§Handling data streams reactively

Progressive Stream Processing and manipulation is an important task in modern Web Programming, starting from chunked upload/download to Live Data Streams consumption, creation, composition and publishing through different technologies including Comet and WebSockets.

Iteratees provide a paradigm and an api allowing this manipulation while focusing on several important aspects:

§Iteratees

An Iteratee is a consumer, it describes the way input will be consumed to produce some value. Iteratee is a consumer that returns a value it computes after being fed enough input.

// an iteratee that consumes chunkes of String and produces an Int
Iteratee[String,Int] 

The Iteratee interface Iteratee[E,A] takes two type parameters, E representing the type of the Input it accepts and A the type of the calculated result.

An iteratee has one of three states, Cont meaning accepting more input, Error to indicate an error state and Done which carries the calculated result. These three states are defined by the fold method of an Iteratee[E,A] interface:

def fold[B](
  done: (A, Input[E]) => Promise[B],
  cont: (Input[E] => Iteratee[E, A]) => Promise[B],
  error: (String, Input[E]) => Promise[B]
): Promise[B]

The fold method defines an iteratee as one of the three mentioned states. It accepts three callback functions and will call the appropriate one depending on its state to eventually extract a required value. When calling fold on an iteratee you are basically saying:

Obviously, depending on the state of the iteratee, fold will produce the appropriate B using the corresponding passed function.

To sum up, iteratee consists of 3 states, and fold provides the means to do something useful with the state of the iteratee.

§Some important types in the Iteratee definition:

Before providing some concrete examples of iteratees, let’s clarify two important types we mentioned above:

§Some primitive iteratees:

By implementing the iteratee, and more specifically its fold method, we can now create some primitive iteratees that we can use later on.

val doneIteratee = new Iteratee[String,Int] {
  def fold[B](
    done: (A, Input[E]) => Promise[B],
    cont: (Input[E] => Iteratee[E, A]) => Promise[B],
    error: (String, Input[E]) => Promise[B]): Promise[B] = done(1,Input.Empty)
}

As shown above, this is easily done by calling the appropriate callback function, in our case done, with the necessary information.

To use this iteratee we will make use of the Promise.pure that is a promise already in the Redeemed state.

val eventuallyMaybeResult: Promise[Option[Int]] = {
  doneIteratee.fold(
  
    // if done return the computed result
    (a,in) => Promise.pure(Some(a)),

    //if continue return None
    k => Promise.pure(None),

    //on error return None
    (msg,in) => Promise.pure(None) 
  ) 
}

of course to see what is inside the Promise when it is redeemed we use onRedeem

// will eventually print 1
eventuallyMaybeResult.onRedeem(i => println(i)) 

There is already a built-in way allowing us to create an iteratee in the Done state by providing a result and input, generalizing what is implemented above:

val doneIteratee = Done[Int,String](1, Input.Empty)

Creating a Done iteratee is simple, and sometimes useful, but it obviously does not consume any input. Let’s create an iteratee that consumes one chunk and eventually returns it as the computed result:

val consumeOneInputAndEventuallyReturnIt = new Iteratee[String,Int] {
    
  def fold[B](
    done: (Int, Input[String]) => Promise[B],
    cont: (Input[String] => Iteratee[String, Int]) => Promise[B],
    error: (String, Input[String]) => Promise[B]
  ): Promise[B] = {
        
    cont(in => Done(in, Input.Empty))
      
  }
  
}

As for Done there is a built-in way to define an iteratee in the Cont state by providing a function that takes Input[E] and returns a state of Iteratee[E,A] :

val consumeOneInputAndEventuallyReturnIt = {
  Cont[String,Int](in => Done(in,Input.Empty))
}

In the same manner there is a built-in way to create an iteratee in the Error state by providing and error message and an Input[E]

Back to the consumeOneInputAndEventuallyReturnIt, it is possible to create a two step simple iteratee manually but it becomes harder and cumbersome to create any real world iteratee capable of consuming a lot of chunks before, possibly conditionally, it eventually returns a result. Luckily there are some built-in methods to create common iteratee shapes in the Iteratee object.

§Folding input:

One common task when using iteratees is maintaining some state and altering it each time input is pushed. This type of iteratee can be easily created using the Iteratee.fold which has the signature:

def fold[E, A](state: A)(f: (A, E) => A): Iteratee[E, A]

Reading the signature one can realize that this fold takes an initial state A, a function that takes the state and an input chunk (A, E) => A and returning an Iteratee[E,A] capable of consuming Es and eventually returning an A. The created iteratee will return Done with the computed A when an input EOF is pushed.

One example can be creating an iteratee that counts the number of bytes pushed in:

val inputLength: Iteratee[Array[Byte],A] = {
  Iteratee.fold[Array[Byte],Int](0) { (length, bytes) => length + bytes.size }
}

Another could be consuming all input and eventually returning it:

val consume: Iteratee[String,String] = {
  Iteratee.fold[String,String]("") { (result, chunk) => result ++ chunk }
}

There is actually already a method in Iteratee object that does exactly this for any scala TraversableLike called consume, so our example becomes:

val consume = Iteratee.consume[String]()

One common case is to create an iteratee that does some imperative operation for each chunk of input:

val printlnIteratee = Iteratee.foreach[String](s => println(s))

More interesting methods exist like repeat, ignore and fold1 which is different from the preceeding fold in offering the opportunity to be asynchronous in treating input chunks.

Of course one should be worried now about how hard would it be to manually push input into an iteratee by folding over iteratee states over and over again. Indeed each time one has to push input into an iteratee, one has to use the fold function to check on its state, if it is a Cont then push the input and get the new state or otherwise return the computed result. That’s when Enumerators come in handy.

Next: Enumerators